Moly Anti-Seize 60
Should be used for the pre-treatment of plain bearings, gears, piston rings, cams and valve stems. In machine shops, for lathe centres, slide screws and all controls. For small mechanisms which cannot be lubricated with normal greases after assembly. For phosphor bronze bearings and threaded components subject to contamination. The use of the compound on items treated will give longer lasting and better results due to the micronic reservoirs of lubricant formed.
This compound is a gelled lubricating oil containing 60% Molybdenum Disulphide, forming a soft paste, together with rust and corrosion inhibitors.
The load carrying capacity of MoS2 is in excess of 140,000 p.s.i. which is above the yield point of most metals. Thus, when a hydrodynamic oil film is not present, wear or damage is prevented. Assembling machinery or fitting parts with the compound eliminates scuffing, pick-up or scoring during the bedding in period after which the machine will run for its designed life with minimum wear.
Quantities: 1kg, 3kg, 12.5kg, 18kg
The products you require to improve production & maintenance through targeted lubrication may be just a phone call away.